Prevent Costly Repairs
Address small issues before they become expensive problems.



At Five Star Wheels and Tires in Oakland Park, FL, we’re an ASE-certified, honest auto repair shop first — not a tire store that also does brakes. A properly functioning brake system is the difference between a close call and an accident. We inspect rotors free, quote any extra work before we touch your car, and never upsell what you don’t need.
At Five Star Wheels and Tires in Oakland Park, FL, we specialize in expert brake repair services designed to keep you safe and your vehicle performing at its best. A properly functioning brake system is essential for your safety, preventing accidents and costly repairs down the line.
Brake issue | Repair it Early | Delayed Repair | Estimated cost increase |
|---|---|---|---|
Worn Brake PadsWorn pads can damage the rotors. | Brake pads: $250 | Pads and rotors: $900 | About 3.6× higher |
Sticking or Worn CaliperUneven pressure can overheat and damage brake parts. | Inspection or service: $150 | Caliper replacement: $350–$450 | Up to 3× higher |
Old Brake FluidContaminated fluid may contribute to corrosion and poor brake response. | Brake fluid flush: $100 | Brake line corrosion repair: $400–$800 | About 4–8× higher |
Worn brake pads, damaged rotors, or low brake fluid can increase stopping distance and reduce braking performance.
Delaying brake repair may cause additional damage to rotors, calipers, brake lines, and other braking system components.
Unresolved brake problems can make your vehicle harder to stop or control, especially during sudden braking or heavy traffic.

At Five Star Wheels and Tires, we believe staying alert to early brake warning signs can prevent costly repairs and keep you safe on the road. If you notice any of these red flags, it’s time to schedule a brake inspection with our expert technicians in Oakland Park, FL:
This often signals worn brake pads or potential rotor damage. Ignoring it can lead to metal-on-metal contact, causing expensive repairs
If your brake pedal feels soft or sinks lower than normal, it could indicate air in the brake lines or moisture contamination in the brake fluid.
A car that drifts left or right while braking could point to uneven brake pad wear, a sticking caliper, or fluid imbalance.
Feeling a shake or pulsation when braking? This can result from warped rotors or a wheel alignment issue that needs immediate attention.
When this light illuminates, it’s your car’s way of saying immediate brake service is required.
At Five Star Wheels and Tires, we know your braking system is vital for your safety and driving confidence. That’s why we offer comprehensive brake repair services to keep your vehicle performing at its best. From minor adjustments to full system repairs, we’re here to ensure your brakes work flawlessly when you need them most.
Brake rotors can sometimes be resurfaced, also called turning or cutting rotors, but Five Star Wheels and Tires does not offer rotor resurfacing. Instead, we inspect the rotor condition, wear, and thickness and recommend brake rotor replacement only when needed.
Rotor resurfacing removes a thin layer of metal from the rotor to create a smoother braking surface. The rotor must still remain above the manufacturer’s minimum thickness after machining.
For many vehicles, the labor involved in removing, measuring, and machining old rotors can make the savings relatively small compared with installing new brake rotors.
We may recommend replacement when rotors are too thin, heavily grooved, heat-damaged, unevenly worn, or no longer provide a proper surface for the brake pads.
We do not automatically replace rotors with every brake pad service. Our technicians inspect the brake pads and rotors first and explain what your vehicle actually needs before any repair begins.


At Five Star Wheels and Tires, we take pride in our meticulous brake inspection process, designed to ensure your vehicle’s braking system is safe, efficient, and ready for anything. Here’s how our process works:
Our technicians begin with a detailed visual inspection to check for signs of wear, damage, or irregularities in your brake pads and rotors. This step identifies obvious issues, such as excessive pad wear or warped rotors, that may require immediate attention.
Using precision tools, we measure the thickness of your brake pads and rotors to ensure they meet manufacturer specifications. Thin or uneven wear may indicate a need for replacement to maintain safe stopping power.
Brake fluid plays a crucial role in your braking system, but over time, it can become contaminated or lose its effectiveness. We check the condition of your brake fluid for contamination, moisture, or low levels, recommending a fluid flush if necessary.
Finally, we assess the overall performance of your braking system, including calipers, brake lines, and the Anti-lock Braking System (ABS). This ensures every component is functioning as it should, giving you peace of mind on the road.




We recommend a brake inspection at least once a year or every 12,000 miles. If you drive in stop-and-go traffic, tow heavy loads, or notice performance issues, check them sooner.
Watch for:
Brake service costs depend on the repair needed:
Most brake repairs, such as pad replacement or rotor replacement, take 1-2 hours. More complex services like caliper or ABS repairs may take longer, depending on the issue.
Yes! We stand by our work and offer a warranty on parts and labor for qualifying brake services. Contact us for details on coverage.